Spectra Ultra Scanning Tranmission electron microscope
Spectra Ultra Scanning Tranmission electron microscope
Spectra Ultra Scanning Transmission electron microscope will start working soon.
Here is a list of check points for your progress towards TEM training.
Basic Training
1 Loading samples on single tilt holder (Pass/Fail)
2 Loading samples onto double-tilt FEI holder (Pass/Fail)
3 Use 1020 Plasma Cleaner to clean up TEM holders (Pass/Fail)
4 Load TEM holders onto TEM microscope (Pass/Fail/Attention)
5 Basic alignment of apertures (Condenser, SA, Objective) (Pass/Fail)
6 Basic alignment of lens (Condenser, Objective, diffraction) (Pass/Fail)
7 Sample preparation (cleaning, baking, plasma etc) (Pass/Fail)
Intermediate Training
1 Use double-tilt holder to go to zone of crystal (Si/SrTiO3) (Pass/Fail)
2 Record high resolution STEM images on the zone (Pass/Fail)
3 Record high resolution TEM images on the zone (Pass/Fail)
4 Record (SA) diffraction images on the zone (Pass/Fail)
5 Record dark field TEM images (Pass/Fail)
6 Know how to set up specific beam conditions (200 kV/120 kV) (Apertures) (Pass/Fail)
7 Perform STEM EDS mapping (Pass/Fail)
8 Perform EELS measurement
9 Perform 4D-STEM data collection
10 Perform Tomography data collection
Availability differs per offering

Spectra Ulra STEM microscope
