Instrument/Equipment Core/Facility: Advanced Prototyping Center at Wright Lab

3D printing

  1. Research Cores Directory
  2. 3D printing

At the APC we have three 3D printers: a Formlabs Form 3, a Dremel 3D20, and a Lulzbot Taz Pro.

Available to Yale researchers only

James A. Nikkel, PhD

3D printers

We have a small selection of 3D printers with a variety of materials to print with, including a resin-based SLA printer. These are primarily for testing designs. We do not offer 3D printing as a stand-alone service.  For standard 3D prints, we recommend one of the wide range of online services.  

green and black 3D printer
orange and black 3D printer
Blue and gray 3D printer

Related Offerings

More Related Offerings
  1. Instrument/Equipment

    Abrasive water jet cutting

    The high-pressure abrasive water jet cutter can be best thought of as a computer-controlled bandsaw. It is largely used to cut through flat material stock.

     

     

    Located within Advanced Prototyping Center at Wright Lab

    James A. Nikkel, PhD

  2. Instrument/Equipment

    Back-end processing

    The cleanroom offers tools for the back-end processing of device fabrication, including a critical-point dryer and scribing and dicing tools, as well as lapping and polishing tools.

    Located within Yale University Cleanroom

    Yong Sun

    Director
  3. Instrument/Equipment

    Chemical vapor deposition

    The chemical vapor deposition (CVD) tools can deposit metal, oxide, and nitride thin films. The cleanroom offers various CVD tools, including plasma-enhanced CVD and atomic layer deposition.

    Located within Yale University Cleanroom

    Yong Sun

    Director